新手造缸

過路甲

Chings,小弟想訂做滴漏缸,
主缸 26×17×18
櫃 26×17×36(要沙缸)
但不懂上落水位怎樣搞才好!!
現時用緊海×display個滴漏水晶缸,化淡curve 5,300L水冷,newjet 1700Lpump!
有咩可以唔駛換,Thanks!!!

過路甲

leoleo 發表於 2012-10-9 14:51
上水泵3500L/h 以上
上水喉 : 6分 , 落水喉1寸

Ching,thanks
但缸上水位應該係缸底出水定缸面好d?因為我唔落擔同頂蓋!!

vsvs

你養乜先?之後用咩造流?沙缸上水距離有幾多?先知用幾大泵
(我個LPS缸同你差唔多,上水距離成米,底二出,用5000L都係啱啱好咋,仲要另加2500L造流)
想靚仔啲咪用底出,加個止回啫,但會有浸屋風險喎
化氮大小睇你生物密度,水冷幾多匹數?牌子?

好一個爸爸

why do u change the tank ar

save some money for bigger tank, better equippment lah

過路甲

vsvs 發表於 2012-10-10 09:35
你養乜先?之後用咩造流?沙缸上水距離有幾多?先知用幾大泵
(我個LPS缸同你差唔多,上水距離成米,底二出,用50 ...

主要養軟野多,上櫃高度約36吋度,底喉出水有d驚!!依家用緊bm curve 5化淡,unistar 300L水冷!

過路甲

好一個爸爸 發表於 2012-10-10 09:57
why do u change the tank ar

save some money for bigger tank, better equippment lah

Coz個櫃開始唔實淨,同之前接喉冇落到pvc膠水,依家成日滴水,冇落到止回,沙缸一停泵就爆水!!

過路甲

1398killer

計時炸彈!!

  

過路甲

So唔想搞都唔得!!

好一個爸爸

接喉冇落到pvc膠水 >> u don't need 膠水if u have use O ring and assemble with suitable force, if u think it is a must, u can always 落pvc膠水 now

冇落到止回>> 止回 valve is not the only way to 止回, crazy killer's 600L RT has no 止回 neither

post pics to show where is the water leak and how the pipes run on the top of u tank

好一個爸爸

櫃開始唔實淨 >> really, their display tank has been there for almost a year, is u home located in earthquake zone

1398killer

好一個爸爸 發表於 2012-10-10 16:17
接喉冇落到pvc膠水 >> u don't need 膠水if u have use O ring and assemble with suitable force, if u th ...

好一個爸爸

crazy killer, open mouth lah, your "allied" shop is being bombarded and suggested as providing substandard equippment ar

1398killer

好一個爸爸 發表於 2012-10-10 16:23
crazy killer, open mouth lah, your "allied" shop is being bombarded and suggested as providing subst ...

過路甲

唔該師兄先!!

好一個爸爸

1398killer 發表於 2012-10-10 16:30

文盲, 一日到黑

1398killer

好一個爸爸 發表於 2012-10-10 16:53
文盲, 一日到黑